[Librem-5-dev] Dev kit booting

[Angus Ainslie]

Hi Zoltan,

Sorry, this teaser was accidentally sent to a public list instead of an
internal one.

Unfortunately you're going to have to wait for the release of the devkit
for the full story.

Cheers

Angus

On 10/20/18 4:35 AM, Zoltan Gyarmati wrote:
>
> Dear Angus&All,
>
> Thanks for the good news, i suppose many of us is looking forward to
> receive our devkits :)
>
> This "https://int.puri.sm
> <https://int.puri.sm/dev/librem-5/emcraft-bsb#booting-the-devkit-using-the-usb-serial-downloader>"
> is an internal Purism wiki, or it's also available for mere mortals? I
> couldn't find a register form.
>
>
> Regards,
> Zoltan Gyarmati
> https://zgyarmati.de
>
> On 2018-10-19 17:38, Angus Ainslie via Librem-5-dev wrote:
>
>> This is what the boot looks like to me :)
>>
>> Console only at this point
>>
>> U-Boot 2017.03-g8c2e4f9c2f (Oct 19 2018 - 08:07:33 -0700), Build:
>> jenkins-u-boot_builds-ec-som_uboot_CI_build-140
>>
>> CPU:   Freescale i.MX8MQ rev2.0 1500 MHz (running at 1000 MHz)
>> CPU:   Commercial temperature grade (0C to 95C) at 66C
>> Reset cause: POR
>> Model: Emcraft i.MX8M SOM LPDDR4-1600
>> DRAM:  3 GiB
>> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
>> MMC: no card present
>> mmc_init: -123, time 2
>> *** Warning - MMC init failed, using default environment
>>
>> In:    serial
>> Out:   serial
>> Err:   serial
>> MMC: no card present
>> mmc_init: -123, time 2
>> Detect USB boot. Will enter fastboot mode!
>> unsupported boot devices
>> Net:   eth0: ethernet at 30be0000
>> Fastboot: Normal
>> Boot from USB for mfgtools
>> Use default environment for                              mfgtools
>> Run bootcmd_mfg: run mfgtool_args;booti ${loadaddr} ${initrd_addr}
>> ${fdt_addr};
>> Hit any key to stop autoboot:  0
>> Bad Linux ARM64 Image magic!
>> u-boot=>
>>
>> On 10/19/18 9:37 AM, Heather Ellsworth via Librem-5-dev wrote:
>>> So exciting, great job!!! Do you happen to have a picture to share that
>>> shows what it looks like once it's booted?
>>>
>>> On 10/19/2018 09:32 AM, Eric Kuzmenko via Librem-5-dev wrote:
>>>> Awesome job, Angus!
>>>>
>>>> On 10/19/18 11:23 AM, Angus Ainslie via Librem-5-dev wrote:
>>>>> Hi All,
>>>>>
>>>>> The devkit can finally boot using linux on the host.
>>>>>
>>>>> Instructions are here
>>>>>
>>>>> https://int.puri.sm/dev/librem-5/emcraft-bsb#booting-the-devkit-using-the-usb-serial-downloader
>>>>>
>>>>> Cheers
>>>>>
>>>>> Angus
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Librem-5-dev mailing list
>>>>> Librem-5-dev at lists.puri.sm <mailto:Librem-5-dev at lists.puri.sm>
>>>>> https://lists.puri.sm/listinfo/librem-5-dev
>>>> _______________________________________________
>>>> Librem-5-dev mailing list
>>>> Librem-5-dev at lists.puri.sm <mailto:Librem-5-dev at lists.puri.sm>
>>>> https://lists.puri.sm/listinfo/librem-5-dev
>>> _______________________________________________
>>> Librem-5-dev mailing list
>>> Librem-5-dev at lists.puri.sm <mailto:Librem-5-dev at lists.puri.sm>
>>> https://lists.puri.sm/listinfo/librem-5-dev
>> _______________________________________________
>> Librem-5-dev mailing list
>> Librem-5-dev at lists.puri.sm <mailto:Librem-5-dev at lists.puri.sm>
>> https://lists.puri.sm/listinfo/librem-5-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puri.sm/pipermail/librem-5-dev/attachments/20181023/ca98c821/attachment-0001.html>