[Pureos-changes] Accepted librem5-base 49pureos1 (source) into landing

[Martin Kepplinger]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Wed, 16 Mar 2022 15:02:12 +0100
Source: librem5-base
Built-For-Profiles: pkg.librem5-base.dbgpkg pkg.librem5-base.nokernel
Architecture: source
Version: 49pureos1
Distribution: byzantium
Urgency: medium
Maintainer: librem5-maintainers <librem-5-dev at lists.community.puri.sm>
Changed-By: Martin Kepplinger <martin.kepplinger at puri.sm>
Changes:
 librem5-base (49pureos1) byzantium; urgency=medium
 .
   [ Guido Günther ]
   * Make sure we get librem5-check by default
     dev-tools is not installed often so move to non-gnome-recommends
     for e.g. support to gather data with.
 .
   [ Martin Kepplinger ]
   * ucm2: Librem_5: create a first working profile for the external mic
     the settings are all based on a discussion with Charles:
     https://lore.kernel.org/alsa-devel/20220207142129.GB112838@ediswmail.ad.cirrus.com/
     Currently we don't get any signal from the external mic. These settings
     result in at least a usable signal (we can try to further improve later).
     There are 3 Volume controls for the analog parts, all before the ADC.
     In order from Jack to ADC, they are:
     numid=10,iface=MIXER,name='Capture Volume'
        ; type=INTEGER,access=rw---R--,values=2,min=0,max=63,step=0
        : values=63,63
        | dBscale-min=-23.25dB,step=0.75dB,mute=0
     "Input PGA Volume Control". 31=0dB. We use 39=+6dB.
     numid=7,iface=MIXER,name='MIXINR PGA Volume'
        ; type=INTEGER,access=rw---R--,values=1,min=0,max=7,step=0
        : values=7
        | dBrange-
          rangemin=0,,rangemax=1
            | dBscale-min=0.00dB,step=6.00dB,mute=0
          rangemin=2,,rangemax=2
            | dBscale-min=13.00dB,step=13.00dB,mute=0
          rangemin=3,,rangemax=4
            | dBscale-min=18.00dB,step=2.00dB,mute=0
          rangemin=5,,rangemax=5
            | dBscale-min=24.00dB,step=0.00dB,mute=0
          rangemin=6,,rangemax=7
            | dBscale-min=27.00dB,step=3.00dB,mute=0
     "Right input PGA to Right input Boost-Mixer Gain"
     0=0dB. we use 1=+3dB.
     numid=8,iface=MIXER,name='MIXINR IN3R Volume'
       ; type=INTEGER,access=rw---R--,values=1,min=0,max=7,step=0
       : values=6
       | dBscale-min=-15.00dB,step=3.00dB,mute=0
     we don't use that since we can either route from PGA or IN3R to MIXINR.
     ("quotes" are from the datasheet)
 .
   [ Steve Stevens ]
   * Adjust modem volume to more closely match system volume.
     This patch increases the volume from calls (incoming volume, so from the
     person calling you) by 50% to bring the call volume to be similar to
     that of what you get from the system volume.
 .
   [ Sebastian Krzyszkowiak ]
   * default: Set ETNA_MESA_DEBUG=nir in phosh service.
     This complements !270 to enable XWayland acceleration, as phoc
     itself does not pick up variables set in profile.d.
   * d/control: Add "Breaks" relation on mesa < 21.2.6.
     With older mesa, enabling 3D acceleration in XWayland causes
     massive synchronization issues.
   * defaults: Add smartcard configuration.
     Based on https://source.puri.sm/firmware/ttxs-firmware/-/blob/purism/PURISM.md
Checksums-Sha1:
 8d99b54e8569e26f4b9b5fc27234e4f571efde8b 2166 librem5-base_49pureos1.dsc
 0b16cd619f0f441cc759ce74402703a9b264bb84 252796 librem5-base_49pureos1.tar.xz
 edea2886092fb3dc4285ac79ca8627e24cd09ec1 9118 librem5-base_49pureos1_arm64.buildinfo
Checksums-Sha256:
 e7211d1ac7dae259464e7506856ab73ff844b77eac40812f4108ea1900e80859 2166 librem5-base_49pureos1.dsc
 f0f6660431134eb30d7cbc36d5a2a80c97a4508080e953ffdc9b761f9436fff0 252796 librem5-base_49pureos1.tar.xz
 9049e95f669b713b70dfe6ec68a8881a557d1510438b06f19b50caa86b3e9316 9118 librem5-base_49pureos1_arm64.buildinfo
Files:
 9284e36618da1b4050fa985dde7e650d 2166 metapackages optional librem5-base_49pureos1.dsc
 72e31762e0860749cafdd1034df2ce42 252796 metapackages optional librem5-base_49pureos1.tar.xz
 5f9b95e7da768caf3f4f08dec624f751 9118 metapackages optional librem5-base_49pureos1_arm64.buildinfo

-----BEGIN PGP SIGNATURE-----
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=9L81
-----END PGP SIGNATURE-----